Need help?Do you have a question about the Maxtec MAXO2 OM-25ME and is the answer not in the manual?
General| Brand | Maxtec |
|---|---|
| Model | MAXO2 OM-25ME |
| Category | Oxygen Equipment |
| Language | English |
Expresses gratitude for the purchase and encourages feedback.
Emphasizes reading the manual for proper operation and maintenance.
Warns about anesthetic gases, flammable mixtures, and general safety precautions.
Details the features and operational benefits of the MAXO2® (Model OM-25ME) base unit.
Describes the LCD readout, indicators, and mounting bushing of the oxygen monitor.
Explains the MAX-250E galvanic, partial pressure oxygen sensor technology and cautions.
Step-by-step guide for installing AA alkaline batteries in the MAXO2® unit.
Instructions and recommendations for calibrating the MAXO2® monitor.
Describes the quick-key shortcut for calibrating the monitor to 20.9% room air.
Explains the effects of temperature, pressure, and humidity on calibration.
Details how to adjust the low and high alarm settings on the MAXO2® monitor.
Instructions on how to check the oxygen concentration of a sample gas.
Explains the conditions for low and high alarms and how the unit responds.
Technical specifications for the base unit of the MAXO2® monitor.
Technical specifications for the MAX-250E oxygen sensor.
Discusses the monitor's interaction with commonly used anesthetic gases.
Explains how pressure affects oxygen readings and calibration techniques.
Describes common calibration errors and hints to prevent them.
Discusses the effect of humidity and condensation on sensor performance and readings.
To Next Page
