MAXTEK 73848 - Getting Started; Basic DVD Operation; Connecting to a TV

8
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Getting Started
Basic DVD Operation
• Before rst time use, open the disc cover and carefully remove and
discard the white cardboard dust cover from inside the deck marked
“Warning: Please take out this card before playing”.
• Remove all transparent protection from the DVD player.
• Connect the mains power adaptor to the mains outlet and the
DC in socket.
• Turn the power switch on the right-hand side panel to ‘on’ .
• Insert a DVD and press the play button.
Connecting to a TV
You can connect the DVD player to a TV so that your movies,
pictures and music can be played on your larger screen.
• Insert the 3.5mm Jack end of the 3.5mm to RCA cable into the
AV out port on the DVD player (Not supplied).
• Connect the three RCA plugs to the corresponding coloured ports
on your TV, normally located on the back.
• Choose the correct AV channel on your TV to view the content of
the DVD player.
Please note:
‘3.5mm to RCA’ cables are available through our website.
If your TV does not have a ‘RCA in’ port, you may need a ‘RCA to SCART’ adaptor
to use this function, if a SCART port is available.
Video
Audio Left
Audio Right