1728 Orbit Way - Minden, Nevada 89423 P: 775-782-1700 F: 775-782-1701 info@maxtonvalve.com www.maxtonvalve.com
90
\\SERVER\CATALOG2019\2019CatalogRev2
BV3-4
Maxton Bleed Port's are machined parts with black oxide finish designed to aid in the bleeding of air from the
jack during installation, oil replacement, or other repairs where unwanted air might enter the jack. No more oil
showers or worn out threads in the jack when typical pipe drain plugs were used. Simply back out the center
set screw slightly releasing air while leaving the main body attached to the jack.
1/4”BleedPort 1/8”BleedPort
297170
297150
Specifications
Material 5/8" Hex, Ledloy
Max Operating Pressure 1000 psi (55 bar)
Line Connections 1/4” NPT or 1/8" NPT
MaxOperangTemperature 150°F(65°C)
OilTypeHydraulicFluid
Overall Dimensions: Width (inch) Height (inch) Weight (ounce)
297150 .625 .900 1.0 oz.
297170 .625 .900 0.8 oz.
BV1-8A
BV1-4A
1/4”NPTFemaletoMale
1/8”NPTMaletoMale
Specifications
Max Operating Pressure 1000 psi (55 bar)
Line Connections 1/8” NPT, 1/4" NPT or 3/4” NPT
MaxOperangTemperature 150°F(65°C)
OilTypeHydraulicFluid
Overall Dimensions: Width (inch) Length (inch) Height (inch) Weight (ounce)
BV1-4A .950 2.050 1.275 4 oz.
BV1-8A .950 1.900 1.275 3 oz.
BV3-4 1.630 5.875 3.000 16 oz.
Piping Dimension: Length (inch)
BV3-4 2.640
The Maxton Hydraulic Shut Off Ball Valve has been tested specifically for hydraulic elevator applications
and comply with ASME A17.1 / CSA B44.
SHUT OFF BALL VALVE / BLEED PORT
3/4”NPTFemaletoFemale