Need help?Do you have a question about the Maxtor D740X-6L 40.0 AT and is the answer not in the manual?
General| Model | D740X-6L |
|---|---|
| Storage Type | HDD |
| Capacity | 40.0 GB |
| RPM | 7200 RPM |
| Buffer Size | 2 MB |
| Average Seek Time | 8.5 ms |
| Transfer Rate | 100 MB/s |
| Form Factor | 3.5" |
| Interface | ATA/133 |
Identifies the intended audiences for the Maxtor D740X-6L hard disk drive product manual.
Outlines the structure of the manual, listing its chapters and their topics.
Defines terms and explains typographical and naming conventions used in the manual.
Provides a general overview of the Maxtor D740X-6L hard disk drives and their technology.
Lists the main features of the Maxtor D740X-6L hard disk drives, including performance and reliability.
Details the safety and EMI/EMS compliance standards met by Maxtor's disk drives.
Specifies the hardware compatibility and requirements for installing the Maxtor D740X-6L drives.
Details the physical dimensions and space needed for installing the Maxtor D740X-6L hard disk drive.
Provides step-by-step instructions for safely unpacking the Maxtor D740X-6L hard disk drive.
Explains jumper configurations and hardware options for the Maxtor D740X-6L hard disk drive.
Details how to connect the drive to a system using a motherboard ATA connector or an adapter board.
Covers drive mounting orientation, clearance, and ventilation requirements for installation.
Describes the J1 connector for DC power and ATA bus interface on the drive.
Instructions for installing the drive in systems with an onboard ATA connector.
Instructions for installing the drive in systems requiring an ATA adapter board.
Discusses techniques for drive configuration, including barriers and OS limitations.
Guides through setting up, partitioning, and formatting the drive for operation.
Provides a summary of the physical, electrical, and environmental characteristics of the drives.
Details the formatted capacity of the Maxtor D740X-6L drives across different models.
Specifies the data transfer rates for the Maxtor D740X-6L drives.
Illustrates the timing specifications, including seek times and latency, for the drives.
Details the power requirements, including voltages and sequencing for the drives.
Specifies the acoustical characteristics (sound power) of the Maxtor D740X-6L hard disk drives.
Lists the mechanical dimensions and form factor specifications for the drives.
Summarizes the environmental specifications for operating and non-operating conditions.
Details the shock and vibration specifications for the Maxtor D740X-6L hard disk drives.
Provides precautions for handling the Maxtor hard disk drive to prevent damage.
Lists reliability metrics such as Mean Time Between Failures (MTBF) and component life.
Specifies the drive's susceptibility to electromagnetic fields (E and B fields).
Provides the maximum spindle imbalance specification for the drives.
Details the error rates for the Maxtor D740X-6L hard disk drives.
Describes the mechanical components and assembly of the Maxtor D740X-6L hard disk drive.
Explains the electronic components and their functions within the Maxtor D740X-6L hard disk drive.
Details the firmware features of the Maxtor D740X-6L drives, such as disk caching and defect management.
Introduces the ATA/ATAPI-6 interface and commands for Maxtor D740X-6L drives.
Describes the mechanical aspects of the ATA interface, including connectors and signal cables.
Covers the electrical characteristics of the ATA bus interface and signaling protocols.
Explains how host systems address command and control registers via the ATA/ATAPI-6 standard.
Details the command interface, including general feature sets and specific command types.
Lists mandatory and optional commands within the general feature set for non-packet devices.
Describes the support for the Multiword DMA protocol.
Details the Ultra DMA feature set commands, including READ DMA and WRITE DMA.
Lists commands related to power management, such as IDLE, SLEEP, and STANDBY.
Details commands for the security mode, including password and erase functions.
Lists commands for the SMART feature set, covering status, data, and log operations.
Describes commands for the Host Protected Area feature, including security extensions.
Details the Automatic Acoustic Management feature set commands.
Provides detailed information returned by the IDENTIFY DEVICE command.
Lists supported subcommands for the SET FEATURES command.
Details Maxtor-specific commands like READ DEFECT LIST and SET CONFIGURATION.
Explains how to retrieve the drive's defect list using the READ DEFECT LIST command.
Describes how to display the drive's configuration using the READ CONFIGURATION command.
Details the SET CONFIGURATION command for changing drive parameters like DisCache.
Explains the command to set drive configuration without saving changes to disk.
Details the SMART READ ATTRIBUTE THRESHOLDS command.
Describes the SMART RETURN STATUS command for checking drive reliability.
Explains the SMART SAVE ATTRIBUTE VALUES command for saving attribute data.
To Next Page
