Maxtor Ultra ATA/100 User Manual

Ultra ATA/100 PCI Adapter Card
B
B
A
A
CK
CK
FOR
FOR
W
W
ARD
ARD
1
PRE INSTALLATION CONT.
WARNING: Removing the installation software of
hard drives other than Maxtor will result in data loss.
Please contact other hard drive manufacturers for
their specific third party software removal procedures.
Fujitsu http://www.fujitsu.com
Quantum http://www.quantum.com
Seagate http://www.seagate.com
Western Digital http://www.wdc.com
ATAPI Devices (DVD ROM, Tape Backup)
If your ATAPI device is not UDMA 66 or 100
compliant, and is currently working fine, please
leave it on that channel. If you experience problems
when attaching a ATAPI device and the device is
not seen by its installation software, please call that
device manufacture for new software.
NOTE: If you’re installing this card in conjunction
with a new Maxtor hard drive, please physically
install both devices (Ultra ATA/100 PCI Adapter
Card and hard drive) before using MaxBlast software.
Refer to the DiamondMax
®
Hard Drive Installation
Guide for specific instructions and drive jumper
configurations.

Maxtor Ultra ATA/100 Specifications

General

Brand	Maxtor
Model	Ultra ATA/100
Category	PCI Card
Language	English