Chapter 7: Deck Equipment
55
Bow Well Cover (Bowriders Only) (If Equipped)
1. Snap the two forward snaps (A) to the deck.
2. Snap the bow cover to the entire port side.
3. On the starboard side, only snap the for-
ward half of the bow cover to the deck.
4. Insert the adjustable, center support pole
(B) into both the bow cover and the table
base (C).
5. Adjust the support pole so that it is just high
enough to stay inserted in the bow cover.
6. Snap the rest of the bow cover to
the deck.
7. Adjust the support pole to take any
slack out of the bow cover.
A
B
C
To Next Page
Loading...