Need help?Do you have a question about the Maxum 2100SC and is the answer not in the manual?
Location and recording of the Hull Identification Number (HIN).
Details about document content, changes, and liability.
Information on Maxum's proprietary rights regarding the document.
Information on obtaining service and support from your Maxum dealer.
Details about the Limited Warranty provided with the boat.
Advice on safe boating practices and recommended courses.
Guidelines for boat engine and accessory installation and modifications.
Information on propeller selection and maintenance for optimal performance.
Guidance on using provided engine and accessory manuals.
Information on the load limit for the extended swim platform.
Importance of using qualified personnel for boat system maintenance.
Overview of safety standards and hazard warnings for boat operation.
Recommendations for maintaining the hull of a moored boat.
Information about the dangers of carbon monoxide on recreational boats.
Key facts and health risks associated with carbon monoxide exposure.
Explains conditions that increase CO accumulation in and around the boat.
Measures to prevent CO poisoning and ensure safety.
Checklists for preventing carbon monoxide hazards during trips and maintenance.
Information on the CO alarm system and its maintenance.
Contact details for additional safety and CO prevention resources.
Technical specifications for the 1800MX model, including dimensions and fuel capacity.
Technical specifications for the 1800SR3 model, including dimensions and fuel capacity.
Technical specifications for the 1900SR3 model, including dimensions and fuel capacity.
Technical specifications for the 2000SR3 model, including dimensions and fuel capacity.
Technical specifications for the 2100SC model, including dimensions and fuel capacity.
Technical specifications for the 2200SR3 model, including dimensions and fuel capacity.
Diagrams illustrating the exterior features and locations on the boat.
Illustrations showing the location of various drains and hull fittings.
Detailed illustration of deck components for the 1800MX model.
Detailed illustration of deck components for the 1800SR3 model.
Detailed illustration of deck components for the 1900SR3 model.
Detailed illustration of deck components for the 2000SR3 model.
Detailed illustration of deck components for the 2100SC model.
Detailed illustration of deck components for the 2200SR3 model.
Illustration of the helm layout for the 1800MX model.
Illustration of the helm layout for 1800SR3, 1900SR3, & 2000SR3 models.
Illustration of the helm layout for the 2100SC model.
Illustration of the helm layout for the 2200SR3 model.
Location of the 12-volt accessory outlet on the 1800MX.
Location of 12-volt accessory outlets on 1800SR3 & 2000SR3.
Location of 12-volt accessory outlets on the 1900SR3.
Location of the 12-volt accessory outlet on the 2100SC.
Location of 12-volt accessory outlets on the 2200SR3.
Location of the battery for the 1800MX model.
Location of the battery for 1800SR3, 1900SR3, 2000SR3 & 2200SR3.
Location of the battery for the 2100SC model.
Location of the battery switch on the boat.
Location of the bilge pump within the engine compartment.
Location of the blower switch for the 1800MX model.
Location of blower switches for 1800SR3, 1900SR3 & 2000SR3.
Location of the blower switch for the 2100SC model.
Location of the blower switch for the 2200SR3 model.
Location of the CO detector on the 2100SC model.
Location of the depth sounder transducer in the engine compartment.
Location of the engine circuit breaker.
Location of the freshwater fill deck fitting on the 2200SR3.
Location of the freshwater pump and filter on the 2200SR3.
Location of the freshwater pump switch on the 2200SR3.
Location of the freshwater tank on the 2200SR3.
Location of fuel fill/vent fittings on specific models.
Location of fuel fill/vent fittings on specific models.
Location of the fuel tank for the 1800MX model.
Location of the fuel tank for specific models.
Location of the fuse block for specific models.
Location of the fuse block for the 2100SC model.
Location of the fuse block for the 2200SR model.
Details on the location of bow and stern navigation lights.
Location of the portable head in the cuddy cabin of the 2100SC.
Location of the pump-out deck fitting for the portable head.
Location of the transom shower on the 2200SR3 model.
Guidance on engine operation and maintenance before starting.
Special procedures for starting cold carbureted engines.
Importance and operation of the bilge blower for fume removal.
Warnings and guidelines for inspecting and filling the fuel system.
Instructions for fueling and troubleshooting fuel fill issues.
Information on the anti-siphon valve's function and maintenance.
Details on fuel pickup screen filters and inline fuel filters.
Maintenance and inspection of the fuel filter/water separator.
Instructions for installing and using the quick oil drain system.
Information on the automatic fire suppression system and its manual discharge.
Details on the rack-and-pinion steering system and its characteristics.
Warning regarding improper maintenance of shift/throttle hardware.
Information on the stern drive's power trim and tilt system.
Cleaning, fogging, interference, and fuel gauge behavior.
Warnings and guidelines for using the depth finder safely.
Description of the bilge pump system for removing water from the bilge.
Procedures for testing the bilge pump and checking for clogging.
Operation and testing of the automatic bilge pump float switch.
Information on the freshwater system, including warnings for safe water use.
Step-by-step guide for winterizing the boat's freshwater system.
Instructions for using the transom shower on the 2200SR model.
Explanation of how deck drains work and their maintenance.
Information and operating instructions for the portable toilet.
Details on the portable toilet pump-out deck fitting.
Warnings and guidelines for using cleats and tow eyes.
Warnings and guidelines for using the ski tow ring.
Warnings and instructions for using the ski-tow tower and attaching the rope.
Step-by-step guide on how to attach the ski tow rope to the pylon.
Instructions for folding and unfolding the ski-tow tower safely.
General precautions for taking down and stowing canvas.
Instructions for installing the bow well cover on bowrider models.
Step-by-step instructions for installing the 1800MX convertible top.
Installation instructions for the convertible top on 1800SR3, 1900SR3, & 2000SR3.
Installation instructions for the convertible top on 2100SC & 2200SR3.
Instructions for snapping side curtains to the windshield and top.
Step-by-step instructions for installing the 1800MX Bimini top.
Installation instructions for the 1800SR3 Bimini top.
Installation instructions for the 2100SC Bimini top.
Installation instructions for Bimini tops on 1900SR3, 2000SR3, & 2200SR3.
Recommendations for rinsing, drying, and storing canvas after use.
Proper methods for cleaning canvas, avoiding detergents.
Guidelines for cleaning and storing clear vinyl to prevent damage.
Note on potential AM radio reception impairment when the engine is running.
Details on Type 'A' seats, operating and lounge positions.
Adjusting seats forward/backward, converting to lounge and chaise positions.
Step-by-step guide to converting the cuddy cabin to a V-berth.
Instructions for converting jump seats to a sunlounge configuration.
Instructions for converting the engine cover to a sunlounge position.
General advice on light maintenance, bulb replacement, and wiring.
Precautions on battery power usage for cabin and exterior lights.
Warning to avoid obstructing navigation lights with stored gear.
Provides power for lights, accessories, and engine starting.
Location and function of fuses for engine and accessory power.
Information on boat's 12V accessory outlets and their usage.
Function of the alternator in charging the battery.
Illustration of the electrical harness routing for the 1800MX deck.
Illustration of electrical harness routing for 1800SR3, 1900SR3, & 2000SR3.
Illustration of the electrical harness routing for the 2100SC deck.
Illustration of the electrical harness routing for the 2200SR3 deck.
Schematic of the electrical system for the 1800MX model.
Schematic of the electrical system for 1800SR3, 1900SR3, & 2000SR3.
Schematic of the electrical system for the 2100SC model.
Schematic of the electrical system for the 2200SR3 model.
Fields to record dealership contact and service information.
Fields for recording engine manufacturer, model, and serial number.
Fields for recording propeller manufacturer, model, and pitch.
Space to record important ignition and other numerical identifiers.
Fields to record manufacturer and serial numbers for electronic components.
Section for detailing boat registration, dimensions, and features.
Fields for recording information about individuals on the boat.
Fields to record the operator's personal and contact information.
Checklist for essential survival equipment carried on the boat.
Detail departure, arrival times, and planned stops.
Information about the vehicle used to transport the boat.
To Next Page
General