31
CHAPTER 7: DECK EQUIPMENT
Canvas
Forward canvas:
1. Zip the forward canvas (A)
to the radar wing (B).
2. Slide the eye ends of the
forward main bow (C) into
the hinges on the wind-
shield frame (D) and insert
the pins.
3. Unfold the forward canvas
and slide the eye ends of the
forward support legs (E) into
the hinges on the wind-
shield frame (F) and insert
the pins.
Aft canvas:
1. Zip the aft canvas (G) to the
radar wing (B).
2. Slide the eye ends of the aft
main bow (H) into the upper
deck hinges on the radar
wing (I) and insert the pins.
3. Unfold the aft canvas and
slide the eye ends of the aft
support legs (J) into the
lower hinges on the radar
wing (K) and insert the pins.
No adjustments to the bow jaw
slides (L) should need to be made
as they are preset during manu-
facturing. Before attempting to
adjust the jawslide positions,
obtain the correct measurements
from your selling dealer.
Take down and securely stow the convertible top, side curtains and back cover before trans-
porting your boat by road.
CAUTION!
!
A
L
B
C
D
E
F
G
H
I
I
H
J
J
K
L
L
PIN
HINGE
DETAIL VIEW OF TYPICAL
EYE END
EYE END & HINGE
To Next Page