EasyManua.ls Logo

Maxview MXL002 - Parental Settings

Maxview MXL002
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 29
PARENTAL SETTINGS
> Enter the “Main Menu” and then the “Parental Settings
sub-menu from the “System” menu.
> “Enter Pin” message will be displayed. Enter the 4 digit
password by using the number buttons. (Factory setting of
your receiver is 0000.)
> The “Parental Settings” menu is displayed once the PIN
has been correctly entered.
> If “Receiver Lock” is “On”, the PIN is asked for every
time the receiver is switched on.
> If you don’t want your receiver settings changed by
somebody else, you can use “Setup Lock” option. If “Setup
Lock” is “On”, the PIN is required to enter the menus
where the channel information and settings are changed.
> To change the PIN, highlight “Change PIN” and press
the “OK” button. “Enter New PIN” becomes active. Enter
the new PIN by using the number buttons. After you have
entered the new PIN, “Confirm New PIN” becomes active.
Enter the new PIN again. After you have pressed the last
number a “Pin changed” message is displayed. Press the
OK” button to confirm.
> Press “MENU” or “EXIT” button to exit from the
“Parental Settings” menu. A message, “Do you want to
store?” will be displayed if you have made any changes.
Press the “OK” button to store. Press “MENU” or “EXIT
button to exit without storing the changes.
FTA/SCRAMBLED: The third listing type is listing the
channels depending on whether they are FTA (Free to
air) or Scrambled (coded) channels. After pressing the
RED” button in the “Channel List” highlight “FTA/
Scrambled” by using “”/” buttons and press the
OK” button. The options are “All”, “FTA Only” and
“the scrambled channel names” in this menu.
Highlight the desired option by using “”/
buttons and press the “OK” button. If you select “All”,
all the channels are listed. If you select “FTA Only”,
only FTA channels will be listed and if you select “one
of the Scrambled channels”, the coded channels that
belong to that scrambled channel will be listed.
> The programs prefixed with a “ ” symbol are
scrambled channels in the “Channel List”.
FAV GROUP: The fourth listing type is listing the
channels according to favourite groups. After pressing
the “RED” button in the “Channel List, highlight “Fav
Group” by using “”/” buttons and press the “OK
button. The options are “All”, “Only Favs” and “the
other favourite channel groups”(that you’ve created
in this menu). Select the desired option by using
”/” buttons and press the “OK” button. If you
select “All”, all the channels are listed. If you select
“Only Favs”, only favorite channels will be listed and
if you select one of the favourite channels that you’ve
created, the favourite channels that belong to that
group will be listed.
ALPHA SORT: The final listing type is listing the
channels depending on alphabetical order. After
pressing the “RED” button in the “Channel List”,
highlight “Alpha. Sort” by using “”/” buttons and
press the “OK” button. The options are “Normal,
“A..Z” and “Z..A” in this menu. Select the desired
option by using “”/” buttons and press the “OK
button. If you select “Normal, the channels are listed
according to the order recorded. If you select “A..Z”,
the channels are listed according to alphabetical order.
If you select “Z..A”, the channels are listed in reverse
alphabetical order.
> Press “MENU” or “EXIT” button to exit the
“Channel List” menu.

Related product manuals