The MAXWORKS™ Model 80695 is a 15-bin tabletop storage rack designed for organizing small hardware components. This instruction manual and parts list provides essential information for its assembly, safe operation, and maintenance.
Function Description:
The primary function of the MAXWORKS™ Model 80695 is to provide an organized storage solution for small hardware components. It consists of a metal frame that supports 15 individual bins, allowing users to sort and store various items efficiently. The tabletop design makes it suitable for placement on workbenches, desks, or other flat surfaces.
Important Technical Specifications:
- Model Number: 80695
- Bin Quantity: 15 individual bins
- Maximum Weight Capacity per Bin: 2 Lbs. (Do not overload the bins.)
- Construction Materials:
- Bins: Durable Polypropylene
- Stand: Powder Coated Steel
- Warranty: 90 days from the date of purchase, covering defects in material and workmanship. Proof of purchase (original invoice or sales receipt) is required for warranty transactions.
Usage Features:
- Assembly: The product requires assembly. Users must attach the Bottom Feet to the Frame Legs using longer bolts and nuts, ensuring the Frame Legs fit inside the "L" bracket on the Bottom Feet. Next, the three Center Support Brackets are attached to the Frame Legs and pressed down to lock into place, with the screw hole oriented closest to the lower lip. Finally, the Upright Support is attached to the back of the Center Support Brackets using shorter bolts. After assembly, all hardware should be tightened, and the rack checked to ensure it sits level.
- Bin Placement: Once the rack frame is assembled, the 15 polypropylene bins are hung onto the rack assembly.
- Loading: Each bin has a maximum weight capacity of 2 Lbs. It is crucial not to overload the bins to prevent damage or instability.
- Placement: The Storage Bin Rack must be placed on a solid surface capable of supporting the combined weight of the rack, all 15 bins, and their contents.
- Safety Precautions:
- Always wear ANSI approved safety goggles during assembly and use.
- Read and understand all safety warnings and instructions in the manual before assembly, installation, operation, or servicing.
- Keep the work area clean and well-lighted during assembly.
- Keep spectators and children out of the work area.
- Do not modify the product or use it for purposes other than its intended design (storage of small hardware components).
- This product is not a toy and should be kept out of reach of children. Small hardware components (screws, bolts, nuts) can be accidentally swallowed by children.
- If not experienced or capable of safe assembly, a qualified service technician should set up the rack.
- Never work while under the influence of alcohol, drugs, or medications.
- Dress appropriately: avoid loose fitting clothing or jewelry, contain long hair, and keep hair, clothing, and gloves away from moving parts.
- Use safety equipment as applicable, such as safety shoes, hard hat, and work gloves.
- In noisy environments, wear hearing protection to prevent hearing loss from prolonged exposure to high intensity noise.
Maintenance Features:
- Periodic Inspection: The general condition of the product should be checked periodically.
- Hardware Tightness: Ensure that all hardware (bolts, nuts) remains tightened.
- Bin Condition: Inspect the bins for any cracks or other damage. Damaged bins should be replaced if necessary.
- Cleanliness: Keep the product clean and free of grease to ensure proper function and longevity.
- Manual Retention: Save the instruction manual, packaging information, and warnings. These contain important information and must always remain readable. Contact MAXWORKS for replacements if needed.
The MAXWORKS™ Model 80695 is a practical and durable storage solution designed to bring organization to small components in a workshop or home environment, provided it is assembled, used, and maintained according to the guidelines provided in this manual.
To Next Page
Need help?
General