DISPLAY PANEL
1. UP / DOWN BUTTON (Temperature control button)
- By pushing the up/down button, you can set the inside temperature.
2. DEFROST
- The electronic defrost controller is set at the factory to provide a defrost cycle every
6 hours.
- Once all frost is eliminated, the defrost control is changed to the freezer mode.
- The panel displays " " during the defrost.
3. DOOR OPENING INDICATOR
- If door is opened, door opening indicator will be turned on.
- If the door is left open for 5 minutes an alarm will sound continuously.
- The alarm will stop immediately upon closing the door.
INSIDE TEMP.
TEMP. CONTROL BUTTON
DOOR OPENING
To Next Page
Loading...
