To Next PageTo Next Page
Need help?Do you have a question about the Maxx Cold MCR-23FD and is the answer not in the manual?
General| Brand | Maxx Cold |
|---|---|
| Model | MCR-23FD |
| Category | Refrigerator |
| Language | English |
Ensure unobstructed airflow around the unit for efficient cooling.
Place unit on a sturdy floor capable of supporting its weight and contents.
Avoid placing near heat sources to maintain optimal cooling efficiency.
This equipment is designed and intended for indoor use only.
Ensure the unit is stable, locking front wheels during use.
Confirm the unit is level from front-to-back and side-to-side.
Clean the unit's interior and exterior with warm water and mild soap.
Periodically clean condenser fins to maintain refrigeration performance.
Frequently clean door gaskets to ensure proper sealing.
Verify unit safety and proper operation after cleaning.
Ensure proper voltage connection; use a protected circuit.
Wait 5 minutes before re-starting if the unit has been disconnected.
Plug in, turn on, and set default/control temperature ranges.
Covers automatic cycling, interior light, and evaporator fan operation.
Use up/down buttons to set the inside temperature.
Indicator for open door, alarms if left open for 3 minutes.
Plug in, turn on, and set default/control temperature ranges.
Covers automatic cycling, defrost, interior light, and evaporator fan.
Use up/down buttons to set the inside temperature.
Explains automatic defrost cycle and panel indication.
Indicator for open door, alarms if left open for 3 minutes.
