- 9 -
1. To start up
• Remove internet radio tuner (called Tuner hereafter) from the package
box. There are two external antennas included in the accessories. Both
are identical. Connect them to the connectors at the back of the Tuner,
labelled with BT Antenna and WiFi antenna respectively. Without the
antennas installed, the WiFi and Bluetooth function do not work properly.
• Plug in the DC adapter and switch the Power on/off switch (on the rear
cabinet) to ON. The Tuner will turn on automatically.
◊ Caution: Use only the adaptor supplied with the radio. Connecting a
power supply with a different rating will cause permanent damage to the
radio and may be hazardous.
• The Tuner is intended to connect with external powered speaker. It does
not have amplifier and speaker driver built-in. Please connect your stereo
through the Analogue output or Digital output located on the rear panel of
the Tuner for listening.
To Next Page
Loading...