7
Repeat with the opposite corner strap.
Locate the drawbar safety strap and insert one end into the female buckle found at the
bottom of the cover. Pass the strap under the drawbar and secure into the opposite buckle.
Fully tension and thread any excess webbing straps through both plastic clips:
WARNING – ensure the cover is secure and correctly fitted to your caravan before
starting your journey. Check frequently during your journey.
PLEASE NOTE – the front towing cover is designed to protect the front of your
caravan when being towed. It is not designed to be used as a storage cover. It is
advised the cover is removed and cleaned once you have reached your destination.
The process for removing the cover is the opposite of the fitting process.
Remove the cover carefully to prevent damage to the cover and your caravan caused by dirt
or grit which may have accumulated during your journey.
To Next Page
Loading...