To Next PageTo Next Page
Need help?Do you have a question about the Maytag Commercial MLE22PDAGW and is the answer not in the manual?
General| Product Type | Top Load Washer |
|---|---|
| Model | MLE22PDAGW |
| Color | White |
| Voltage | 120V |
| Depth (in) | 27 |
| Energy Star Qualified | No |
| Automatic Water Levels | Yes |
| Bleach Dispenser | Yes |
| Fabric Softener Dispenser | Yes |
| Detergent Dispenser | Yes |
| Motor (HP) | 1/2 |
| Amps | 15 |
| Capacity (cu. ft.) | 3.5 |
| Agitator Type | Dual Action |
| Material | Stainless Steel |
| Weight | 155 lb |
| Width (in) | 27 in |
| Height (in) | 43 in |
| Cycle Options | Normal, Heavy Duty, Delicates |
| Dimensions (H x W x D) | 43.5" x 27" x 27" |
| CEE Tier | Not Available |
Symbol indicates potential hazards that can kill or hurt you and others.
Explains DANGER (immediate hazard) and WARNING (potential hazard) meanings.
Specific warning about dryer installation and use of flexible venting materials.
Do not store or use gasoline or other flammable vapors near the appliance.
Steps to take if you smell gas: do not light, clear area, call supplier/fire department.
Gas and electrical installations must conform to local or national codes.
Instructions for proper grounding, outlet type, and circuit requirements.
Specific steps for grounding cord-connected and permanently connected units.
Recommended methods for connecting gas supply line and pressure testing.
Mandatory installation of a manual shut-off valve within 6 ft. of the dryer.
Proper grounding, outlet type, and circuit requirements for the washer.
Instructions for grounding the electric dryer to prevent shock hazards.
Use of UL listed 30 amp cord and strain relief; disconnect power before connections.
Instructions for wiring to NEMA 10-30R (3-wire) and 14-30R (4-wire) receptacles.
Use 10 gauge copper wire, UL listed strain relief; disconnect power before wiring.
Steps for connecting neutral, ground, and supply wires for direct wiring.
Use heavy metal vent; dryer exhaust must be outdoors to prevent fire risk.
Recommended rigid pipe, flexible connector, and alternate tubing for gas supply.
Requirements for pressure testing and installing a manual shut-off valve.
Detailed steps for wiring a 4-wire power supply cord to the terminal block.
Steps for connecting neutral and remaining wires for a 3-wire power supply cord.
Instructions for stripping cable and connecting ground/neutral for 4-wire direct.
Connecting ground/neutral and remaining wires for 4-wire direct connection.
Connecting neutral and remaining wires for 3-wire direct connection.
Steps for connecting neutral wire and ground wire for optional 3-wire connection.
