EasyManua.ls Logo

Maytag Amana PTH123D AR Series User Manual

Maytag Amana PTH123D AR Series
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RS4200003 Rev. 5
April 2009
Service Instructions
®
is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX. All rights reserved.
Package Terminal
AirConditioners & Heat Pumps
This manual is to be used by qualified, professionally trained HVAC technicians only.
Goodman does not assume any responsibility for property damage or personal injury
due to improper service procedures or services performed by an unqualified person.
© 2000 - 2009 Goodman Company, L.P.
Question and Answer IconNeed help?

Do you have a question about the Maytag Amana PTH123D AR Series and is the answer not in the manual?

Maytag Amana PTH123D AR Series Specifications

General IconGeneral
Voltage230/208 V
Power Cord Length6 ft
Refrigerant TypeR-410A
Cooling Capacity12, 000 BTU
Heating Capacity11, 000 BTU
Operating Current5.4 A
Noise Level52 dB

Summary

Important Information

High Voltage Warning

Critical safety warning regarding high voltage hazards during servicing.

Proper Installation

Wall Sleeve Installation

Instructions for correctly installing the wall sleeve for the unit.

Chassis Installation

Procedure for inserting and securing the unit chassis into the wall sleeve.

Wiring

Instructions and warnings for wiring the unit, emphasizing copper conductors and grounding.

Temperature Limiter Settings

How to set temperature limits to control energy costs.

Configuration Settings for G, K & M Model Boards

How to enter and configure unit settings for various operating options.

Maintenance

Intake Air Filter

Instructions for cleaning and maintaining the unit's intake air filter.

Basepan and Condenser Coil

Detailed steps for cleaning the basepan and condenser coil for optimal operation.

Operations

Digital Board Diagnostics

How to access and interpret diagnostic codes from the digital control board.

Diagnostic Codes

Servicing

Dehydrating and Evacuating Refrigeration System

Steps for properly dehydrating and evacuating the refrigeration system.

Leak Testing

Methods for detecting refrigerant leaks in the system.

Brazing

Techniques and materials for brazing refrigeration system components.

S-15 Capacitor Check

Procedure for checking the resistance and capacitance of the unit's capacitors.

S-17 Compressor Windings

Procedure for testing compressor windings for shorts, grounds, or opens.

S-116 Filter Drier Replacement

Instructions for replacing the filter drier assembly in the refrigerant system.

Schematics

Related product manuals