Maytag Dishwasher - Dishwasher Cycles and Operation

SELECTING CYCLES AND OPTIONS/STARTING DISHWASHER
APPROX.
CYCLE SETTING SEQUENCE CYCLE TIME ]WATER USE
RINSE _ HOLD:
Use to rinse a relatively few soiled dishes Rinse 5 Min. 2 Gal.
which are to be held until the dishwasher is
full. Press Rinse & Hold pad.
0 UICK CYCLE:
Use to quickly wash dusty or very lightly Wash 1 5 Cat.
soiled dishes you wish to store or reuse '2 Rinses | I7 Min.
immediately. Press Quick Cycle pad.
Hejat_D_ry______-..... 35 Min, (Optional)
LIGHTCHINA:
Use for china and crystal and for loads Rinse 7 Gal.
containing medium to light amounts of soil. Main Wash 41 Min.
Press Light/China pad. 2 Rinses
Dry • -- 35 Min.
76 Min.
NORMAL CYCLE:
Use for washing loads containing normally PreWash 9 Gal.
soiled dishes. This would include dishloads Rinse
49 Min.
with problem soils. Press Normal Cycle pad. Main Wash
2 Rinses
Dry' -- 35 Min.
84 Min. + Heating Delay °
POTS _ PANS:
Use for loads with heavy or dried soils. Press PreWash 11 Gal.
Pots & Pans pad. 2 Sani Rinses
64 Min.
Main Wash
2 Sani Rinses
Dry -- 35 Min.
99 Min. + Heating Delay °
"The AUTO TEMP BOOST feature may extend the main wash (up to 10 additional minutes) to heat the water to
proper temperature. The HEATING DELAY indicator will light when the cycle is being extended due to low water
temperatures.
PAGE8