Maytag LAV3600AWW User Manual (English)

Questions and Answers:

K
Kristen ThomasAug 8, 2025
Why won't my Maytag Washer spin or drain?
- D
  davidchanAug 8, 2025
  Several factors can prevent your Maytag washer from spinning or draining. It could be due to an unevenly distributed load; try redistributing the load, closing the lid, and pulling the knob out. Check the leveling of the washer and ensure the water level is appropriate for the load size. Also, inspect the drain hoses for any kinks or obstructions, and straighten them if necessary. In case of suds lock, rewash without detergent, and use the correct amount of a low-sudsing detergent. Remember to close the lid and pull the knob to start the washer, as it won't spin with the lid open. If the issue persists or there is a drain restriction or lid switch malfunction, it is best to call for service.
J
James RodriguezAug 14, 2025
What to do if my Maytag Washer won't fill with water?
- A
  Anne BeltranAug 14, 2025
  If your Maytag washer isn't filling, make sure it's properly plugged into a working electrical outlet and that the fuse is intact or the circuit breaker hasn't tripped. Turn the control knob to the correct cycle and pull it out to start the washer. Ensure that both faucets connected to the washer are fully turned on and that the inlet hoses are straight, not kinked. Also, the hose filter screens may be plugged, try disconnecting the hoses and cleaning the screens.
G
George LambertAug 19, 2025
Why does my Maytag LAV3600AWW keep stopping?
- D
  duncancatherineAug 20, 2025
  Your Maytag washer might stop for several reasons. An unevenly distributed load can cause it; try redistributing the load, closing the lid, and pulling the knob out. Ensure the washer is level and the water level is suitable for the load size. Verify the washer is plugged into a working outlet and the fuse or circuit breaker is functioning correctly. Make sure the control knob is set to the correct cycle and pulled out to start the washer, and that the lid is closed properly. It may also be a pause or soak period in the cycle, so wait briefly to see if it restarts. If the lid switch malfunctions, it is best to call for service.
C
Christy AllenAug 27, 2025
What to do if my Maytag LAV3600AWW Washer load is still wet after washing?
- K
  Kimberly MartinezAug 27, 2025
  If your Maytag washer leaves the load wet, it might have detected an unevenly distributed load. Try redistributing the items in the tub, close the lid, and pull the control knob out. Also, consider that a normal spin speed is recommended for heavy loads such as jeans or towels.
J
john61Sep 1, 2025
How to fix a Maytag Washer that won't agitate?
- K
  Kathryn AshleySep 2, 2025
  If your Maytag washer isn't agitating, first check the fuse or reset the circuit breaker. Ensure that the lid is completely closed. Turn the control knob to the correct cycle and pull it out to start the washer. Remember, the washer won't agitate or spin unless the lid is closed for safety. If the lid switch malfunctions, it is best to call for service.

Maytag LAV3600AWW Specifications

General

Brand	Maytag
Model	LAV3600AWW
Type	Top Load Washer
Capacity	3.6 cu. ft.
Color	White
Energy Star Certified	No
Spin Speed	700 RPM
Water Level Settings	4
Agitator	Yes
Dimensions (H x W x D)	43.5 x 27 x 27 inches