Need help?Do you have a question about the Maytag LAT8014 and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model | LAT8014 |
| Type | Top Load Washer |
| Color | White |
| Agitator | Yes |
| Water Levels | Variable |
| Energy Star Certified | No |
| Wash Cycles | 10 |
| Deep Fill Option | No |
| Power Source | Electric |
| Voltage | 120V |
| Width | 27 inches |
| Depth | 27 inches |
| Height | 43 inch |
Essential safety notes regarding appliance grounding and electrical hazards.
Warning about California Proposition 65 substances and potential gas exposure.
Detailed technical specifications for Maytag washers, including capacity, motor, and power.
Checks and requirements before installing the Maytag washer.
Information on the necessary electrical supply and connection for the washer.
Essential guidelines for proper grounding of the Maytag washer for safety.
Details on receptacle requirements and proper grounding plug usage.
Optimal water pressure range for correct washer filling and operation.
Guidelines for cold, hot, and warm water settings for optimal washing.
Diagrams showing the physical dimensions of the washer unit.
Instructions and considerations for proper washer drain hose installation.
Guidance on selecting appropriate flooring for washer installation to minimize vibration.
Recommendations for washer placement to avoid freezing and ensure proper operation.
Advice on operating and storage temperatures to prevent damage.
Information regarding lubrication requirements for the product.
Details on the cabinet and external finishes and their maintenance.
Procedure to follow in case of flooding exposure to the washer.
Step-by-step guide for installing the Maytag automatic washer.
Description and usage of an appliance test meter for continuity and resistance checks.
Explanation of continuity testing for electrical components and circuits.
Typical resistance values for common washer components.
Procedure and safety precautions for performing voltage checks on the washer.
Method for using a voltmeter to perform continuity checks on switches.
Steps to set up and use a meter for accurate water temperature readings.
Explanation of how a clamp-on ammeter measures current draw in appliance circuits.
Chart showing typical amperage draws for washer operations.
Description and use of a motor test cord for electrical component checking.
Description and duration of the regular wash cycle for various soil levels.
Details on the Easy Care/Permanent Press cycle for wrinkle reduction.
Information on the delicate cycle for sensitive garment construction.
Description of the all-fabric delicate cycle with alternating wash and soak.
Cycle for gently washing hand-washable items, suitable for sensitive skin.
Description of the hand-washable cycle, similar to SENSI-CARE but without options.
Cycle designed for pretreating products and enhanced stain removal.
Provides extended wash time for heavily soiled durable loads.
Adds wash and soak time to the cycle beginning for heavily soiled items.
Cycle designed to soak heavily soiled or stained items without advancing to wash.
Provides a shorter wash for lightly soiled items.
Adds an additional deep rinse for better additive removal.
Provides additional spin time for improved water extraction.
Reduces hot water usage by restricting hot water inflow.
Instructions on how to operate the control panel and select wash cycles.
Operating instructions specific to the LAT9904 model's control panel.
Instructions for selecting and operating the Permanent Press cycle.
Guidance for operating the Knits/Delicates cycle for gentle fabric care.
How to program and use custom wash cycles for specific loads.
Details on Fine Wash, Soak Only, and other special cycle functions.
How to change cycle selections and monitor program progress.
Guidelines for selecting the correct water level based on load size.
Instructions for setting water temperature for optimal wash results.
How to adjust the wash time for different cycles.
Instructions for selecting additional wash options like Slow Spin or Off.
How to use the automatic presoak feature for heavily soiled items.
How to add an extra rinse to the selected cycle.
How to select a warm final rinse under specific temperature conditions.
Instructions on how to start the Maytag washer cycle.
Explanation of features like Unbalanced Signal and Sequence Indicators.
Guidance on selecting Energy Saver, Extra Rinse, and Wash/Spin Speed options.
How to adjust the infinite slide lever for proper water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the automatic presoak cycle for heavily soiled items.
Guidance on selecting Energy Saver, Extra Rinse, and Wash/Spin Speed options.
How to adjust the infinite slide lever for proper water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the automatic presoak cycle for heavily soiled items.
How to adjust the selector knob for correct water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the presoak cycle for heavily soiled items.
How to adjust the selector knob for correct water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the soak only cycle for heavily soiled items.
How to adjust the selector knob for correct water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the soak only cycle for heavily soiled items.
Procedure to initiate the washer cycle after selections are made.
How to adjust the selector knob for correct water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the water-saver feature to save and reuse wash water.
Procedure for reusing saved wash water for the next load.
How to adjust the infinite selector knob for correct water level selection.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
How to use the water-saver feature to save and reuse wash water.
Procedure for reusing saved wash water for the next load.
How to adjust the infinite selector knob for correct water level.
Instructions for selecting water temperature for wash and rinse cycles.
How to choose the wash cycle and set the wash time.
Guidance on selecting wash cycles based on soil level.
How to use the soak only cycle for heavily soiled items.
Explanation of cycle functions and operation sequence for timer-controlled models.
Overview of control panel layouts and features for Maytag washer models.
Description of LAT2300 control panel features and standard features.
Description of LAT2500 control panel, including additional features.
Procedures for removing and servicing washer control components like the timer.
Information on microprocessor board function, fault codes, and removal.
List of fault codes displayed by the microprocessor board and their meanings.
How to view diagnostic information displayed on the washer.
Overview of key components within the Maytag washer.
Explanation of timer-controlled and infinite level water level controls.
How to reset the water level control to change settings.
Description, testing, and removal of the water level switch.
Methods for performing electrical tests on washer components.
Differences in water level switches for microprocessor models and their operation.
Procedure for checking water level control continuity and function.
Description and removal procedure for the air tube and dome assembly.
How the microprocessor board controls motor speed and direction via relays.
Testing and checking the motor run relay for proper operation.
Testing and checking the motor reversing relay for spin function.
Checking and testing the transformer for correct voltage output and continuity.
Function of the varistor in protecting the microprocessor board from voltage surges.
Description and purpose of the lid switch assembly in timer models.
Procedure for checking the fuse in the lid switch assembly.
How to adjust the lid switch assembly for proper operation.
Lid switch operation and testing for microprocessor models.
Procedures for removing and replacing the washer lid.
How the washer detects and responds to an unbalanced load.
Instructions for removing and replacing the front panel for access.
Description, removal, and replacement of the washer agitator.
How the fabric softener dispenser works and its use during the final rinse.
Description of self-cleaning filters and their operation during spin.
Details on manual lint filters found in Water Saver models.
Procedure for removing and replacing the water injector housing.
Description of the three different water valve types used in Maytag washers.
Operation and calibration of thermistor-controlled water valves.
Step-by-step instructions for removing the washer water valve.
Procedure for mounting and connecting a new water valve.
Explanation of how the water valve operates with solenoids and temperature control.
Importance of inlet hose screens for preventing valve failure.
Troubleshooting steps for when the washer does not fill with water.
Diagnosing and resolving slow water fill issues in the washer.
Explanation of water valve operation and pressure requirements.
Information on the start capacitor's function in the motor circuit.
Description of an accessory capacitor kit for easier installation.
Description and removal procedure for the washer's poly pump.
Procedures for replacing drive and pump belts on the washer.
Information on the location and securing of the belt guard.
How to adjust the pump belt tension for proper operation.
Description and removal/replacement of the bleach injector system.
How to detect and diagnose leaks from the center shaft or boot seals.
Procedure for removing the inner tub assembly from the washer.
Procedure for re-centering the washer tub if it becomes off-center.
Diagnosis and repair of leaks related to the mounting stem and boot seal.
Procedure for removing and replacing the tub bearing.
How the transmission mechanism drives the agitator during the wash cycle.
How the transmission mechanism drives the tub during the spin cycle.
Step-by-step guide for disassembling and repairing the washer transmission.
Procedure for replacing the damper assembly if needed.
Identifying a dry brake package by a screeching noise during spin.
Steps for safely disassembling the brake package due to spring tension.
Step-by-step instructions for removing the washer's console assembly.
Procedure for removing and replacing switches on the console.
Instructions for correctly installing the washer's drain hose and siphon break.
Troubleshooting steps for electrical failures in microprocessor-controlled Maytag washers.
Troubleshooting steps when the washer fails to spin or agitate.
Diagnosing the issue where the washer spins when it should agitate.
Troubleshooting when agitation occurs during the spin cycle.
Steps to diagnose why the washer is not filling with water.
Troubleshooting when the washer overfills and the overflow switch activates.
Diagnosing causes for the washer overflowing.
Troubleshooting incorrect water levels with washer agitating.
Troubleshooting when the motor runs but the washer won't agitate.
Specific troubleshooting for agitation issues on delicate cycles.
Steps to diagnose and resolve washer overflow issues.
Troubleshooting when the washer fails to perform a cool-down fill.
Diagnosing reversed hot and cold water connections or wiring.
Steps to resolve slow water filling issues.
Troubleshooting when the washer fails to fill for the rinse cycle.
Troubleshooting when the washer fills but fails to agitate.
Diagnosing continuous agitation with a non-advancing timer.
Troubleshooting steps when the washer fails to spin.
A quick guide to diagnosing common washer problems and their causes.
Troubleshooting steps when the timer motor or contacts fail.
Diagnosing reasons why the washer fails to spin.
Identifying and resolving noise and vibration problems in the washer.
Troubleshooting steps when the washer fails to pump water out.
Diagnosing why clothes remain wet after the spin cycle.
Identifying common sources of water leaks in the Maytag washer.
Wiring diagram and schematic for the LAT9904 Maytag washer model.
Wiring diagram and schematic for the LAT9824 Maytag washer model.
Wiring diagram and schematic for the LAT9804 Maytag washer model.
Wiring diagram and schematic for the LAT9734 Maytag washer model.
Wiring diagrams and schematics for LAT9714 and LAT9704 models.
Wiring diagram and schematic for the LAT9634 Maytag washer model.
Wiring diagrams and schematics for LAT9604, LAT8434, LAT8404 models.
Wiring diagram and schematic for the LAT9334 Maytag washer model.
Wiring diagrams and schematics for multiple LAT models.
Wiring diagrams and schematics for LAT8034, LAT8024, LAT8004 models.
Wiring diagrams and schematics for LAT7314 and LAT7304 models.
Wiring diagram and schematic for the LAT2914 Maytag washer model.
Wiring diagrams and schematics for LAT8504 and LAT3914 models.
Wiring diagrams and schematics for LAT8424 and LAT8414 models.
Wiring diagram and schematic for the LAT8904 Maytag washer model.
Wiring diagram and schematic for the LAT9804 Maytag washer model.
Wiring diagram and schematic for the LAT8244 Maytag washer model.
Wiring diagram and schematic for the LAT8804 Maytag washer model.
Wiring diagram and schematic for the LAT8714 Maytag washer model.
Wiring diagrams and schematics for LAT8704 and LAT4914 models.
Wiring diagram and schematic for the LAT8614 Maytag washer model.
Wiring diagram and schematic for the LAT8604 Maytag washer model.
Wiring diagrams and schematics for LAT8624 and LAT5914 models.
Wiring diagrams and schematics for LAT8504 and LAT3914 models.
Wiring diagrams and schematics for LAT8424 and LAT8414 models.
Wiring diagrams and schematics for multiple LAT models.
Wiring diagrams and schematics for LAT7314 and LAT7304 models.
Wiring diagrams and schematics for LAT5005 and LAT5004 models.
Wiring diagram and schematic for the export model LAT5004AG*.
Wiring diagrams and schematics for LAT5006 and LAT9206 models.
Wiring diagram and schematic for the LAT9306 Maytag washer model.
Wiring diagram and schematic for the LAT9406 Maytag washer model.
Wiring diagram and schematic for the LAT9606 Maytag washer model.
Wiring diagram and schematic for the LAT9706 Maytag washer model.
Wiring diagram and schematic for the LAT9806 Maytag washer model.
Wiring diagram and schematic for the LAT2300 Maytag washer model.
Wiring diagram and schematic for the LAT2500 Maytag washer model.
To Next Page