Do you have a question about the Maytag MAH9700AW* and is the answer not in the manual?
Identifies the Maytag 27" Front Load Washer and its service manual.
Outlines responsibilities and general warnings for users and technicians.
Explains the meaning of DANGER, WARNING, and CAUTION symbols and words.
Provides essential safety precautions for operating the washer.
Details requirements for proper electrical connections, grounding, and polarization.
Defines electrical terms and provides grounding instructions for safety.
Guides on identifying model/serial numbers and accessing service/parts information.
Explains the meaning of the model number's alphanumeric characters.
Lists common problems like "Will Not Start", "Leaking", "No Tumble", and "Will Not Spin".
Explains how to enter Service Mode and interpret diagnostic codes for troubleshooting.
Details procedures for tests like "Fast Time Down Test" and "Quick Service Cycle".
Lists components and their specific testing procedures and expected results.
Details the control board layout and Automatic Temperature Control (ATC) operation.
Illustrates water flow paths in the dispenser during wash and rinse cycles.
Covers disassembly of top cover, water level sensor, reactor coil, and EMI filter.
Outlines removal of water valve, dispenser, control console, and appliance door.
Details procedures for removing the front panel, boot, heater element, and motor.
Provides steps for removing the drain pump and the outer tub/spinner assembly.
Details electrical, grounding, water, and drain facility requirements.
Steps for preparing the washer, selecting a location, and final checks.
Information on 50 Hz operation, technical assistance, and parts.
Guidance on unpacking the washer and reporting shipping damage.
Introduces the guide and details on loading, starting, and controls.
Guidance on detergent, dispenser use, features, and cleaning procedures.
Basic troubleshooting tips, information codes, and storage instructions.