To Next PageTo Next PageWhy is my laundry load still wet after washing in my Maytag MAV2755AWW?
If your laundry load is still wet after washing in your Maytag Washer, it could be due to an unevenly distributed load. Redistribute the load, close the lid, and restart the washer. Ensure the washer is level and the water level is appropriate for the load size. A normal spin speed is recommended for heavy loads.
Why is my Maytag MAV2755AWW not agitating?
If your Maytag Washer isn't agitating, check the fuse or reset the circuit breaker. Ensure that the lid is completely closed. Then, turn the control dial to the proper cycle and restart the washer. Keep in mind that pauses during a cycle are normal; wait to see if the washer starts again.
Explains the importance of safety precautions and common sense when operating the appliance.
Details the meaning of WARNING and CAUTION symbols and words used in the manual.
Guidance on selecting and using laundry detergent for optimal results.
Instructions on how to load the washer for best circulation and performance.
Provides extra advice for operating the washer, including spin cycle behavior.
Step-by-step guide for operating the 3 Speed Select washer models, covering water level, temperature, and cycles.
Step-by-step guide for operating the 4 Speed Select washer models, covering water level, temperature, and wash/spin speeds.
Step-by-step guide for operating Electronic Control washer models, including soil and fabric selection.
Explains how to use the automatic liquid chlorine bleach dispenser.
Details how to use and clean the automatic liquid fabric softener dispenser.
Describes the self-cleaning lint filtering system that traps and removes lint.
Explains the washer's feature to handle out-of-balance loads without shutting down.
Instructions for maintaining the washer's exterior and interior, including hose checks.
Recommendations for cleaning and freshening the washer interior periodically.
Details the terms and coverage of the limited one-year warranty for parts and labor.
Lists conditions and circumstances not covered by the product warranties.
Provides instructions on how to obtain service, including contact information and required details.
General
