Connecting a Portable
1. Turn on the faucet at the sink until the water runs hot.
Turn off the faucet.
2. Pull the connector from the recess in the back of the dish-
washer.
3. Press down on the thumb release and lift the connector
onto the faucet.
4. Remove pressure from the thumb release and tug slightly on
the connector to be sure it is securely in place.
5. Turn the hot water on full force.
6. Check that the sink drain is open so water from the dish-
washer can drain properly.
7. Pull the electrical cord from the recess. Plug it into a prop-
erly grounded outlet.
8. Select the proper cycle and options for the load and start
the dishwasher.
Disconnecting a Portable
1. Be sure to turn the water supply off and press the pressure
release button BEFORE removing the connector.
2. Press down on the thumb release and remove the connec-
tor from the faucet.
3. Push the connector and hoses back into the cabinet recess.
4. Unplug the electrical cord and push it back into the cabi-
net recess.
-_-i"'m!
Release
Button
Care and Cleaning
Clean the cabinet and laminate top with a soft damp cloth
and liquid spray cleaner.
To polish and protect the laminate top, use a product specif-
ically developed for countertops such as Hope's Countertop
Polish*.
Apply an appliance wax to the cabinet once a year.
*Brand names are the trademarks of the respective manufacturer.
To Next Page
Loading...
