INSTALLATIONREQUIREMENTS
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools needed:
Pi ors Fiat-blade _._
screwdriver
Phillips
screwdriver
i
sAs"and 1/4" _) UL listed or CSA
nut drivers or _ approved twist-on _
hex sockets _ wire connectors* _
J
Small level
5
10" adjustable wrench _ Y8 open-end
that opens to _//'_ wrench _/_
11/8"(2.9 cm)
_Must be the proper size to connect your household
wiring to 16-gauge wiring in dishwasher
OtFh::_ is_::l items _nee_at h rowe
Parts su )lied:
2-Drain hose clamps
(1 large and ! sma!l)
ar Green
Make sure all these parts are included in the literature package.
Parts needed:
--_ ====
%,'Compr x¾, Hose Fitting
Fo[ part or kit; see local
retailer or call Whirlpool
Parts: 1,800,442,9991, Part
Other parts you may also need:
1 V2'!--2" _ I Masking
,3811 s.0ore) ,
Sc[ew_type
clamps!3max)j
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Tools needed:
Parts needed:
_Coppe[ tubing (3/8" see"Electrical Requirements,, Section
O.D suggested) 0r , z i
flexible braide,4 t-or Direct Wire: For Power Supply
: at'erSu_"-I ;'ine I use UL listed or Cord: useUL
vv _p y I
CSA approved hsted power
I strain relief to supplyc0rd kit
[_t_.,_ _j_j)_) I fit % (2.2 cm) Part Number4317824
\_ hole marked for use
With dishwaSher
Additional parts supplied with certain models only:
[ BottOm SOund pad doeated I Moisture barrier tape
[in lower rack) [ J
Make sure all these parts are included in the package containing
literature.
To Next Page
Loading...
Need help?
General
