To Next PageTo Next Page
Need help?Do you have a question about the Maytag MDB8959SBS1 and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Color | Stainless Steel |
| Capacity | 14 Place Settings |
| Noise Level | 47 dBA |
| Wash Cycles | 6 |
| Drying System | Heated Dry |
| Control Type | Electronic |
| Depth | 24.5 inches |
| Height | 34.5 inches |
| Cutlery Basket | Yes |
| Energy Star Certified | Yes |
| Soil Sensor | Yes |
| Third Rack | Yes |
| Stainless Steel Tub | Yes |
| Delay Start | Yes |
| Water Consumption | 3.2 gallons per cycle |
| Width | 23 7/8 inches |
Explains safety alert symbols, DANGER, WARNING, and tip-over hazards.
Lists necessary tools and parts for dishwasher installation.
Identifies optional parts that may be required for installation.
Specifies tools required only for first-time dishwasher setup.
Details location requirements for access, clearance, and proper leveling.
Provides diagrams and measurements for dishwasher and cabinet opening fit.
Specifies requirements for the dishwasher drain hose connection and routing.
Outlines conditions for the dishwasher water supply line and pressure.
Details necessary electrical supply, wiring, and safety standards.
Instructions for preparing the cabinet opening with pre-existing utilities.
Instructions for preparing the cabinet opening for new utility connections.
Overview of choices for electrical connection: power cord or direct wire.
Guides on routing the power supply cord through the cabinet to the opening.
Guides on routing the water supply line through the cabinet to the opening.
Steps for installing the dishwasher drain hose correctly.
Instructions for routing and connecting the water supply line to the valve.
Details various options for connecting the drain hose to waste disposal or sink tee.
Instructions to remove shipping foam blocks and heed installation safety warnings.
Steps for removing plastic rail covers, panels, and fasteners.
Instructions for preparing the terminal box and installing cable strain relief.
Guides on routing the power cord into the dishwasher's terminal box.
Instructions for connecting the ground wire and unit wires to the terminal.
Steps to secure the power cord and reattach the terminal box cover.
Guides on measuring the cabinet opening for correct dishwasher fit.
Instructions for adjusting dishwasher height and modifying insulation blanket.
How to adjust the dishwasher's leveling legs and wheels for stability.
Instructions for adding shims to account for raised or built-up floors.
Details for attaching the dishwasher to wood or laminate countertops.
Instructions for securing the dishwasher to the side of the cabinet.
Guides on safely moving the dishwasher into the cabinet opening.
Verifies proper positioning of water and drain lines before moving unit.
How to adjust the door spring tension for proper door opening and closing.
Instructions for sliding the dishwasher fully into the cabinet opening.
Adjusting the dishwasher front for flush alignment with cabinet doors.
Steps for preparing copper or flexible water supply lines for connection.
How to check and adjust the dishwasher's level and legs for plumbness.
Instructions for tightening the water supply elbow fitting to the valve.
Procedures to check the water supply connection for leaks after installation.
Steps for connecting the drain hose to the dishwasher's drain connector.
Guides on routing the direct wire cable into the dishwasher's terminal box.
Instructions for connecting the ground wire and unit wires for direct wiring.
Verifying alignment and preparing for securing by removing rack.
Steps to secure the dishwasher to the cabinet sides using mounting brackets.
Instructions for securing the dishwasher to the underside of the countertop.
Instructions for securing the dishwasher to the side of the cabinet.
Verifies door clearance and inner spacing between tub and cabinet opening.
Checks side attachment and replaces plastic cover buttons for a finished look.
Reattaching the access panel and fasteners after installation.
Final step to plug the power supply cord into a grounded outlet.
Restoring electrical power at the fuse box or circuit breaker.
Steps to check if the dishwasher is functioning correctly after installation.
Provides solutions for common problems if the dishwasher fails to operate.
Offers tips on rinse aid usage, cycle times, and start/resume light behavior.
