8
E.00 E. ADD COINS OPTION
This option is either SELECTED ON or NOT SELECTED, OFF.
This option causes the customer display to show the number of coins (coin 1) to enter, rather
than the dollars-and-cents amount.
00 Not Selected, OFF.
AC Selected ON
Press DELICATES keypad 3 consecutive times for this selection
Press PERMANENT PRESS keypad once to advance to next code.
J.Cd J. COIN or DEBIT OPTION
Cd Both coin & debit selected.
C_ Coins selected, debit disabled.
_d Debit Card selected, coin disabled.
Press DELICATES keypad 3 consecutive times for this selection
Ed. Enhanced debit is self-selected when a Generation 2 card reader is installed in the dryer. The
Ed option
cannot be manually selected or deselected.
Press PERMANENT PRESS keypad once to advance to next code.
L.00 L. PRICE SUPPRESSION OPTION
This option is either SELECTED ON OR NOT SELECTED, OFF.
This option causes the customer display to show AVAILABLE or ADD rather than the
amount of money to add. (Used mainly in debit installations.)
00 Not Selected, OFF.
PS Selected ON
Press PERMANENT PRESS keypad once to advance to next code.
n.CE n. CLEAR ESCROW OPTION
This option is either SELECTED ON OR NOT SELECTED OFF.
When selected, money held in escrow for 30 minutes without further escrow or cycle activity
will be cleared.
00 Not Selected, OFF.
CE Selected ON
Press PERMANENT PRESS keypad once to advance to next code.
o.50 o. WHITES AND COLORS TEMPERATURE SETTING
50 Represents the degrees in Fahrenheit temperature (plus 100 degreees). Example: 50 equals
150 degrees. By pressing the WHITES and COLORS keypad you can adjust the value from
100 degrees to 150 degrees.
Press PERMANENT PRESS keypad once to advance to next code.
o.40 o. PERMANENT PRESS TEMPERATURE SETTING
40 Represents the degree in Fahrenheit temperature (plus 100 degrees). Example: 40 equals 140
degrees. By pressing the WHITES and COLORS keypad you can adjust the value from 100
degrees to 150 degrees.
Press PERMANENT PRESS keypad once to advance to next code.
o.30 o. DELICATES TEMPERATURE SETTING
30 Represents the degrees in Fahrenheit temperature (plus 100 degrees). Example: 30 equals 130
degrees. By pressing the WHITES and COLORS keypad you can adjust the value from 100
degrees to 150 degrees.
Press PERMANENT PRESS keypad once to advance to next code.
To Next Page
Loading...
