Maytag MTB1891AR - Page 6

5
Installation
Reversing Door Handles
To remove the handles, reverse the above steps. Flip
the handles 180° and mount them on the opposite
doors.
Note: Phillips screw driver is required for
installation.
Freezer Door Handle Installation
SCREW
Align handle
HANDLE
SCREW
Secure bottom end of
handle with two screws.
Do not over-tighten
Refrigerator Door Handle Installation
SCREW
HANDLE
SCREW
STEP 1
STEP 2
Fasten with screw
STEP 3
Rotate handle
STEP 4
STEP 1
Fasten with screw
STEP 2
STEP 3
Push handle down
STEP 4
Secure top end of
handle with two screws
Do not over-tighten
1
with mounting screw
1
2
Align handle
with mounting screw
2