Maytag MTB2155 User Manual

Details on power supply, codes, and grounding for safe operation.

Explains how air circulates in forced air models for cooling.

Methods for verifying the proper functioning of the refrigeration system.

Lists essential tools for servicing R134a refrigerant systems.

Describes the basic principles and components of the refrigeration cycle.

Outlines procedures for diagnosing sealed system issues using symptoms and tests.

Procedures for identifying and locating refrigerant leaks within the system.

Function and replacement procedure for the refrigerant drier.

Information on the condenser's role in heat exchange and its maintenance.

Details on compressor function, replacement, and diagnostic considerations.

Step-by-step guide for flushing the refrigeration system after repairs.

Procedures for purging and charging the refrigerant system.

Explains the function and testing of starting components for the compressor motor.

How temperature controls manage compartment cooling and baffle operation.

Operation and service of automatic damper systems for temperature regulation.

Function and testing of the defrost timer that controls the defrost cycle.

Details on the defrost heater and thermostat operation and testing.

Information on the condenser fan's role and its replacement.

Details on the freezer fan's function and replacement procedure.

Guides for removing and installing various types of refrigerator shelves.

Instructions for removing and installing cantilever shelf trim pieces.

Procedures for removing and reinstalling crisper drawers and shelves.

Steps for disassembling and replacing meat pan shelf components.

Explains the function of the freezer control and how it affects air flow.

Describes the path of defrost water and potential blockages.

Procedures for removing and replacing the inner door liner and seal.

Instructions for removing and replacing the outer door panel.

Steps for changing the door hinge configuration from right to left.

Information on the cabinet's rear wheels and front wheel assembly.

Guidance on adjusting the refrigerator to ensure it is level and stable.

Details on the magnetic door seal and adjustments for proper sealing.

Procedures for aligning cabinet doors for optimal fit and seal.

How to remove and replace the door switch.

Overview of testing ice maker components without removal.

Steps for testing ice maker electrical components with power applied.

Procedures for testing heater resistance when the ice maker is unplugged.

General procedures for disassembling and reassembling ice maker parts.

How to adjust the water fill level for consistent ice production.

Common issues related to water quality affecting ice maker performance.

How to test and replace the ice maker thermostat.

Installation procedure for the ice maker's shut-off arm.

Procedure for removing the ice maker wiring harness.

How to ensure uniform ice crescent formation by leveling the ice maker.

Steps for removing and replacing the fill cup assembly.

Troubleshooting steps for a unit with no power or light.

Diagnosing issues when the unit has power but doesn't run.

Identifying causes for continuous or excessive running cycles.

Troubleshooting lack of cooling despite continuous operation.

Diagnosing uneven cooling where the freezer is too cold.

Addressing issues causing food to dehydrate excessively.

Troubleshooting causes of unusual noise during normal operation.

Technical specifications and performance data for 15 cu. ft. models.

Technical specifications and performance data for 17 cu. ft. models.

Technical specifications and performance data for 19 cu. ft. models.

Technical specifications and performance data for 21 cu. ft. models.

Technical specifications and performance data for 24 cu. ft. models.

Technical specifications and performance data for 26 cu. ft. models.

Specs for 19 cu. ft. auto damper models.

Specs for 21 cu. ft. auto damper models.

Specs for 24 cu. ft. auto damper models.

Specs for 26 cu. ft. auto damper models.

Visual representation of the refrigerator's electrical wiring.

Detailed electrical schematic showing component connections.

Diagram illustrating the path of refrigerant through the system.

Pictorial wiring diagram specific to auto damper models.

Schematic wiring diagram for auto damper models.