Need help?Do you have a question about the Maytag MTW6300TQ Bravos and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model | MTW6300TQ |
| Type | Top Load Washer |
| Color | White |
| Energy Star Certified | No |
| Spin Speed | 700 RPM |
| Dimensions (H x W x D) | 43.5 in x 27 in x 27 in |
| Agitator Type | Dual Action |
Defines the purpose and learning outcomes for the service professional.
Provides critical safety messages and symbols to prevent injury or death.
Lists necessary tools, parts, and prerequisites for washer installation.
Specifies ideal locations for the washer to minimize noise and vibration.
Provides recommended clearance dimensions for recessed area and closet installations.
Details the different drain system options and their installation requirements.
Outlines electrical supply needs, safety precautions, and grounding instructions.
Provides a step-by-step guide for physically installing the washing machine.
Instructions for connecting the hot and cold water inlet hoses to the washer and faucets.
Guidance on properly securing the drain hose to prevent leaks and ensure correct drainage.
Procedure for ensuring the washer is level to minimize noise and vibration.
Final checks and initial test run procedures after installation is complete.
Explains the internal workings and new components of the Bravos™ Automatic Washer.
Guides users on how to start and operate the washing machine, including loading and detergent.
Describes available wash cycles and their preset settings for fabric care.
Explains how to customize cycles using soil level, load size, and temperature settings.
Details features like Auto Temp Control, Delay Wash, Options, and Stain Cycle.
Instructions for cleaning the washer interior, exterior, and dispensers.
Guidance on preparing the washer for non-use, storage, or winter conditions.
Provides a systematic approach to diagnosing and resolving common washer problems.
Details specific tests to diagnose electrical and mechanical issues within the washer.
Illustrates the location of major internal components within the washer.
Step-by-step instructions for accessing and removing the control panel's electronic components.
Detailed procedure for removing the water inlet and dispenser valve assembly.
Instructions for removing dispenser components, fresh fill inlet valve, and the lid lock mechanism.
Procedure for safely removing the washer's lid and its associated hinges.
Steps to remove the wash basket and its connecting hub assembly.
Guide for accessing and removing the drain and recirculation pump components.
Instructions for removing the direct drive motor and its position sensor assembly.
Detailed steps for removing the main wash tub from the washer assembly.
Procedure for accessing pressure transducer tubing and drain pump harness by removing the rear panel.
Tests the resistance of water inlet solenoids and the thermistor.
Tests the resistance of the drain and recirculation pump motors.
Checks the resistance values of the lid lock motor winding and switches.
Tests the resistance of the drive motor stator terminals.
Lists error codes displayed by the washer and recommended troubleshooting actions.
Explains how to activate and use automatic, manual, and console diagnostic test modes.
Provides a guide for diagnosing common problems and specific component tests.
To Next Page