9
Removing the Chlorine Bleach Grate
The gray siphon cap for chlorine bleach has a grate
covering the dispensing compartment.This grate helps
prevent items from falling into the bleach dispenser by
accident.The grate is detachable for easy clean-up.
1.When the chlorine bleach compartment is empty, lift the
gray siphon cap out of the chlorine bleach compartment.
(Illustration #1).
2.Run water over the entire siphon cap and grate to wash
off any excess chlorine bleach.
3. Look at the backside of the siphon cap. Using your
thumb, press the bottom notch up and outward
(Illustration #2).The grate should come out of the hole
(Illustration #3).
4.Take the pieces to the sink for cleaning.
CC
LEANING THE DISPENSERS
#1
#2
#5
#4
#3
Replacing the Chlorine Bleach Grate
1.Place the top two notches in the top of the hole.
2.Using your thumb, press the bottom notch up and
outward (Illustration #4).
3.Replace the siphon tube back into the chlorine
bleach dispenser (Illustration #5).
To Next Page
Loading...
Need help?
General