EasyManua.ls Logo

Maytag Neptune TL FAV6800A User Manual

Maytag Neptune TL FAV6800A
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Neptune TL
This Base Manual covers general information
Refer to individual Technical Sheet
for information on specific models
This manual includes, but is
not limited to the following:
FAV6800A
FAV9800A
Service
This manual is to be used by qualified appliance
technicians only. Maytag does not assume any
responsibility for property damage or personal
injury for improper service procedures done by
an unqualified person.
16022808
Revision 0
December 2003

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Maytag Neptune TL FAV6800A and is the answer not in the manual?

Maytag Neptune TL FAV6800A Specifications

General IconGeneral
BrandMaytag
ModelNeptune TL FAV6800A
TypeWasher
ColorWhite
Energy Star CertifiedYes
Number of Wash Cycles12
Maximum Spin Speed1000 RPM
Loading TypeTop Load
Water Temperature SettingsCold, Warm, Hot

Summary

Important Information

Notices for Technicians and Consumers

Notices for technicians and consumers regarding service procedures.

Safety Symbol Recognition

Explanation of safety symbols, words, and labels.

Troubleshooting Procedures

Service Mode Operations and Diagnostics

Accessing service mode, tests, and diagnostic features.

Common Washer Faults

Troubleshooting steps for common issues like no start, leaks, spin, and fill problems.

Additional Faults and Codes

Troubleshooting lid lock, drain, water temp, and consumer codes.

Service Mode Operations and Tests

Accessing service mode, tests, and diagnostic features.

Detailed Diagnostic Code Information

Explanation of specific diagnostic codes, triggers, and actions.

Hose Reversal Correction and Torque Specs

Correcting hose reversal and component torque specifications.

Component Diagnostics and Leaks

Diagnosing components and troubleshooting tub leaks.

Control Board Inputs and Membrane Pad Checks

Control board input table and membrane pad continuity checks.

Troubleshooting Common Issues

Steps for common faults like no start, leaks, spin, and fill problems.

Additional Troubleshooting Topics

Troubleshooting lid lock, drain, water temp, and favorite cycles.

Diagnostic Code Management

Viewing, accessing, and clearing diagnostic codes.

Specific Component Diagnostics

Diagnostics for hoses, sensors, and leaks.

Important Safety Information

Electrical Grounding Requirements

Detailed instructions for proper electrical grounding.

Disassembly Procedures

Important Safety Instructions

Safety Instruction Overview and Symbols

General safety overview and recognition of symbols.

Safety Guidelines and Symbols

Essential safety guidelines and recognition of symbols.

Operating Instructions

Care and Cleaning Instructions

Troubleshooting Washer Issues

Common Issue Checks

Checks for common problems like wet loads, leaks, and spin issues.

Information Codes Explained

Explanation of information codes displayed by the washer.

Clothes Washer Warranty

Control Panel Explanation

Clothes Washer Warranty Information

Warranty Service and Exclusions

How to obtain warranty service and list of exclusions.