*Some models.
6
–
53
Maintenance and Care
Owner Maintenance
Position lights (With halogen
headlights)
*
7. Install the new bulb in the reverse order
of the removal procedure.
Front fog lights
*
1. Make sure the ignition is switched off,
and the fog light switch is off.
2. Turn the screw anticlockwise and
remove it, and then partially peel back
the mudguard.
3. Disconnect the connector from the unit
by pressing the tab on the connector
with your fi nger and pulling the
connector downward.
4. Turn the socket and bulb assembly
to remove it. Carefully remove the
bulb from its socket in the refl ector by
gently pulling it straight backward out
of the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
To Next Page
Loading...
