2-23
Essential Safety Equipment
Seats
Form No. 8R21-EA-02G
6. Remove the support bar from the
pocket.
7. Set the hook on the support bar in the
rear of the seatback.
8. Pull the seatback towards the front of
the vehicle until the opposite end of the
support bar hooks onto the anchor loop
in the side trim. Attempt to push the
seatback towards the rear (liftgate) to
make sure the support bar is securely
latched.
To return the third-row seat to the road
position (forward facing)
1. Detach the support bar by following
the reverse procedure for installation.
2. From inside the vehicle, carefully
lower the seat towards the front until it
locks in place. Attempt to move the
seat forward and backward to make
sure it’s securely locked in place.
3. Reinsert the head restraints.
Support bar
Pocket
J16L_8R21-EA-02G.book Page 23 Saturday, June 8, 2002 11:16 AM
To Next Page
Loading...
