2-48
Essential Safety Equipment
Child Restraint
Form No. 8R21-EA-02G
▼
LATCH Child-Restraint System
Installation Procedure (Second-
Row Seats)
1. Slide the second-row seat as far back as
possible.
2. Raise the reclining lever and lower the
seatback forward.
3. Raise the seatback to the most upright
position. Make sure the seatback is
securely latched by rocking the
seatback.
4. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
5. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer’s instruction.
6. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer’s instructions
when installing tethers.
For right seat
For left seat
LATCH lower
anchor
Second-row
seat
Anchor bracket
location
J16L_8R21-EA-02G.book Page 48 Saturday, June 8, 2002 11:16 AM
To Next Page
Loading...
