Black plate (114,1)
Before Getting In
l
Be sure the windows, outside mirrors,
and outside lights are clean.
l
Inspect inflation pressures and
condition of tires.
l
Look under the vehicle for any sign of
fluid leaks.
l
If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. Se e
Maintenance, Section 8.
After Getting In
l
Are all doors closed and locked?
l
Is the seat adjusted properly?
l
Are the inside and outside mirrors
adjusted?
l
Is everyone's seat belt fastened?
l
Check all gauges.
l
Check all warning lights when the
ignition switch is turned to the ON
position.
l
Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly familiar with your
Mazda.
4-6
Before Driving Your Mazda
Before Starting the Engine
Mazda3_8V66-EA-06F_Edition3 Page114
Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
To Next Page
Loading...
