Black plate (18,1)
To change the seatback angle, press the
front or rear side of the reclining switch.
Release the switch at the desired position.
q
Height Adjustment (Driver's Seat)
To adjust the seat height, move the switch
up or down.
qSeat Position Memory
í
The driver's seat position memory
function allows you to progra m a desired
seat position. The personalized positions
can be easily activated with the simple
touch of a button. The programmed
positions can also be activated when
unlocking the doors using a programmed
advanced key/retractable type key.
Seat positions for up to three people can
be programmed into the memory using
the three available programming buttons.
CAUTION
When activating the seat position, do
not place your hands or fingers
around the seat bottom. The seat
moves to the desired position
automatically, and if your hands or
fingers are placed around the seat
bottom, it could cause injury.
NOTE
l
Only operate the seat memory function
while the vehicle is parked.
l
Vehicle maintenance or other reasons
requiring the vehicle battery to be
disconnected will result in the seat position
memory being erased.
In this case, re-program the seat positions.
Programming
1. Adjust the seat to the desired position.
For each seat position adjustment
method refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-5)
Height Adjustment (page 2-6)
2-6
Essential Safety Equipment
í
Some models.
Seats
CX-9_8BH3-EC-10H_Edition1 Page18
Friday, July 30 2010 2:57 PM
Form No.8BH3-EC-10H
To Next Page
Loading...
