Black plate (564,1)
Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tir es. This information identifies and describes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certificati on and in case of
a recal l.
qInformation on Passenger Vehicle Tires
Please refer to the sample below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Run-flat tire
7. Rim diameter code
8. Load index & speed symbol
9. Severe snow conditions
10. Tire ply compo sition and materials used
9-24
Customer Information and Reporting Safety Defects
Tire Information (except Canada)
CX-9_8BH3-EC-10H_Edition1 Page564
Friday, July 30 2010 3:2 PM
Form No.8BH3-EC-10H
To Next Page
Loading...
