Black plate (565,1)
11. Max. load rating
12. Tread wear, traction and temperature grades
13. Max. permissible infl ation pressure
14. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by either ETRTO
(European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association).
215
“215” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidew all edge. In general, the larger
the number, the wider the tire.
65
“65” is the aspect ratio. This two-digit numbe r indicates the tire's ratio of height to width.
R
“R” is the tire constructi on symbol. R indicates “Radial ply construction”.
15
“15” is the wheel rim diameter in inches.
95
“95” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
Customer Information and Reporting Safety Defects
Tire Information (except Canada)
9-25
CX-9_8BH3-EC-10H_Edition1 Page565
Friday, July 30 2010 3:2 PM
Form No.8BH3-EC-10H
To Next Page
Loading...
