EasyManua.ls Logo

Mazda 2011 CX-9 - Page 394

Mazda 2011 CX-9
605 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (393,1)
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select Mazda from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt: Please say the name of the
device after the beep.
18. Say: [Beep] XXXX - - - (Speak a
device tag, an arbitrary name for
the device.)
Example: Stan's device.
NOTE
Speak a programmed device tag within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar device tag.
19. Prompt: Adding XXXXXX - - -
(Ex. Stan's device) (Device tag). Is
this correct?
20. Say: [Beep] Yes
21. Prompt: Pairing complete
(Type B/Navigation system)
1. Activate the Bluetooth application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without nav igation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] Telephone or
Phone.
3. Say: [Beep] Setup
4. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
5. Say: [Beep] Pairing options
6. Prompt: Available options are, Pair,
Edit, Delete, List, or Set Pairing Code.
7. Say: [Beep] Pair
8. Prompt: Start the pairing process on
your Bluetooth device. Your pairing
code is 0000 (XXXX). Input this code
on your Bluetooth device when
prompted on the device. See device
manual for instructions.
9. Using the device, perform a search for
the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select Mazda from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: Please say the name of the
device after the beep.
13. Say: [Beep] XXXX - - - (Speak a
device tag, an arbitrary name for
the device.)
Example: Stan's device.
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
6-141
CX-9_8BH3-EC-10H_Edition1 Page393
Friday, July 30 2010 3:1 PM
Form No.8BH3-EC-10H

Table of Contents