Black plate (460,1)
3. Remove the cover.
Cover
4. Attach the socket to the spare tire
carrier bolt, the jack lever to the socket,
and the lug wrench to the opposite end
of the jack lever.
Bolt
Socket
Lug wrench
Jack lever
5. Slowly turn the lug wrench
counterclockwise until the spare tire
reaches the ground and the cable
becomes loose.
Spare tire
CAUTION
Do not loosen the cable too much as
this may cause damage to the spare
tire ca rrier.
6. Rotate the small lever on top of the
retaining plate and pull the retaining
plate out from the center hole o f the
tire.
7-6
In Case of an Emergency
Flat Tire
CX-9_8BH3-EC-10H_Edition1 Page460
Friday, July 30 2010 3:1 PM
Form No.8BH3-EC-10H
To Next Page
Loading...
