Black plate (507,1)
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
5. Carefully insert the new blade rubber.
Then inst all the blade assem bly in the
reverse order of removal.
Maintenance and Care
Owner Maintenance
8-29
CX-9_8BH3-EC-10H_Edition1 Page507
Friday, July 30 2010 3:2 PM
Form No.8BH3-EC-10H
To Next Page
Loading...
