Mazda 2012 5 - Page 219

Black plate (218,1)
(Programming with “text” display (e.g.
channel name))
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR
(bank number) (selected text
(e.g. channel name))]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channe l name)
flashes. Then, [SR
(bank number)]
is displayed and you will hear beep
sound at the same time.
3. [SR
(bank number) CH
(preset number) (channel number)]
are displayed.
4. Three seconds later, it returns to normal
display. [SR
(bank number) (text
(e.g. channel name))]
NOTE
Six stations can be stored in each bank, SR1,
SR2, and SR3 for convenient access to your
favorite stations.
Preset channel call-up
Press and release the channel preset
button,
[SR
(bank number) CH (preset
number)
(channel number)] appears.
When the preset button is pressed during
text mode, its channel numbe r is
displayed first for three second and then
its text is displayed.
NOTE
In the initial setting, all channels are preset to
184.
Category change
Press the category button (
or ) and
select the desired category.
l
Press the category button ( ):
Category up
l
Press the category button ( ):
Category down
Every time the category button (
)is
pressed, the category is c hanged over in
the order shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
Highest category → All categories →
Lowest category
NOTE
While all categories are selected, all channels
covering a category can be accessed
(Category off condition).
Channel selection within a category
If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.
l
Turn the manua l tuning dial clockwise:
Channel Up
l
Turn the manua l tuning dial
counterclockwise: Channel Down
NOTE
The channel number needs to be indicated in
the display to use manual tuning dial for this
function.
6-32
Interior Comfort
Audio System
Mazda5_8BS1-EC-10J_Edition3 Page218
Monday, April 11 2011 3:41 PM
Form No.8BS1-EC-10J