Mazda 2012 5 - Page 271

Black plate (270,1)
10. Say: [Beep] “XXXXX... (Ex. device
C)” (Speak a “device tag”,an
arbitrary name for the device.)
11. Prompt: “XXXXX... (Ex. device C)
(Device tag), is this correct?”
12. Say: [Beep] “Yes”
13. Prompt: “New name saved.”
qSecurity Setting
If a passcode is set, the system cannot be
activated unless the passcode is input.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
Passcode setting
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “ Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Passcode”
5. Prompt: “ Passcode is disabled. Would
you like to enable it?”
6. Say: [Beep] “Yes”
7. Prompt: “ Please say a 4-digit
passcode. Remember this passco de. It
will be required to use this system.”
8. Say: [Beep] “XXXX” (Say a desired 4-
digit passcode, “PCode” .)
9. Prompt: “ Passcode XXXX (Passcode,
PCode). Is this correct?”
10. Say: [Beep] “Yes”
11. Prompt: “Passcode is enabled.”
Using Bluetooth Hand s-Free with a
passcode
1. Press the pick-up button or talk button
with a short press.
2. Prompt: “ Hands-Free system is
locked. State the passcode to
continue.”
3. Say: [Beep] “XXXX” (Say the set
passcode “ PCode”.)
4. If the correct passcode is input, voice
guidance “ XXXXXX... (Ex. “Mary's
device) (Device tag) is connected” is
announced.
If the passcode is incorrect, voice
guidance “ XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again” is announced.
Canceling the passcode
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “ Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Passcode”
5. Prompt: “ Passcode is enabled. Would
you like to disable it?”
6. Say: [Beep] “Yes”
7. Prompt: “ Passcode is disabled.”
6-84
Interior Comfort
Bluetooth Hands-Free
Mazda5_8BS1-EC-10J_Edition3 Page270
Monday, April 11 2011 3:41 PM
Form No.8BS1-EC-10J