4
–
49
When Driving
Switches and Controls
With auto-wiper control
Switch
Position
Wiper operation
Operation while pulling up lever
Stop
Auto control
Low speed
High speed
Auto-wiper control
When the wiper lever is in the
position, the rain sensor senses the amount
of rainfall on the windshield and turns the
wipers on or off automatically (off—
intermittent—low speed—high speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), rotate
the switch downward for higher sensitivity
(faster response) or rotate it upward for
less sensitivity (slower response).
Higher sensitivity
Less sensitivity
Switch
Center
position
CX-38EH2-EA-15BEdition2.indb49CX-38EH2-EA-15BEdition2.indb49 2015/04/0715:31:412015/04/0715:31:41
To Next Page
Loading...
