*Some models.
4
–
118
When Driving
i-ACTIVSENSE
Laser Sensor (Front)
*
Your vehicle is equipped with a laser sensor (front). The laser sensor (front) is positioned
near the rearview mirror and used by the following systems.
y
Smart Brake Support (SBS)
y
Smart City Brake Support (SCBS)
Laser sensor (front)
CAUTION
Heed the following precautions to assure correct operation of the system.
¾
Keep the windshield clean at all times.
¾
Do not apply stickers to the surface of the windshield (including transparent stickers).
¾
If cracks or damage caused by ying gravel or debris is visible near the laser sensor
(front), stop using the system immediately and have your vehicle inspected by an
Authorized Mazda Dealer.
See the next page on how to turn o the system. Refer to Personalization Features on
page 9-10 .
¾
Do not apply a coating agent to the windshield.
¾
When replacing the windshield wipers or windshield, consult an Authorized Mazda
Dealer.
¾
Never remove the sensor.
¾
A removed sensor will not meet the conditions for a class 1M laser under the IEC
60825-1 speci cation and therefore eye safety cannot be assured.
¾
Do not peer into the sensor using optical instruments with a magni cation function
such as magnifying glasses, and microscopic and objective lenses within a distance
of 100 mm (3.94 in) from the sensor.
CX-38EH2-EA-15BEdition1.indb118CX-38EH2-EA-15BEdition1.indb118 2014/12/0910:51:062014/12/0910:51:06
To Next Page
Loading...
