Black plate (199,1)
NOTE
The CD will begin playback
automatically after insertion.
A CD cannot be inserted while the
display reads “WAIT”. A beeping
sound can be heard during this waiting
time. Simultaneously pressing the
power/volume dial and the load button
(
) for about 2 seconds will turn
this beepin g sound ON or OFF.
Normal insertion
1. Press the load button (
).
2. When “ IN” is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button (
)
for about 2 seconds until a beep sound
is heard.
2. Press the channel preset button for the
desired tray number while “WAIT” is
displayed.
3. When “ IN” is displayed, insert the CD.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
Multiple insertion
1. Press and hold the load button (
)
for about 2 seconds until a beep sound
is heard.
2. When “ IN” is displayed, insert the CD.
3. When “ IN” is displayed again, insert
the next CD.
NOTE
The firs t-inserted CD will be played
automatically when:
l
No other CD is inserted within 15
seconds after “IN” is displayed.
l
The CD trays are full.
Displaying the CD-inserted tray
number
When you want to know the number for a
CD-inserted tray, press the display butto n
(
). The tray number will be displayed
for 5 seconds.
Ejecting the CD
Normal ejection
1. Press the CD eject button (
). The
disc number and “ DISC”“OUT” will
be displayed.
2. Pull out the CD.
NOTE
l
When the CD is ejected during play,
the next CD will be played
automatically.
l
If the CD is not removed from the
slot wi thin approximately 10 seconds
after ejection, it will be re- inserted
automatically.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button (
)
for about 2 seconds until a beep sound
is heard.
The “DISC”“OUT” display flashes.
Interior Comfort
Audio System
6-41
Mazda5_8U38-EA-05D_Edition1 Page199
Monday, March 28 2005 2:21 PM
Form No.8U38-EA-05D
To Next Page