Black plate (174,1)
NOTE
l
For maximum defrosting, set the
temperature control dial to the
extreme hot position and the fan
control dial to position 4.
l
If warm air is desired at the floor, set
the mode selector dial to the
position.
l
In the , ,or position, the
air conditioner is automatically
turned on (however, the indicator
light does not illuminate) and the
outside air mode is automatically
selected to defrost the windshield.
In the
or position, the
outside air mode cannot be changed
to the recirculated air mode.
qDehumidifying (With Air
Conditioner)
í
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
1. Set the mode selector dial to the
desired po sition.
2. Set the air intake selector to the outside
air mode.
3. Set the temperature control dial to the
desired po sition.
4. Set the fan control dial to the desired
speed.
5. Turn on the air conditioner by pressing
the A/C switch.
NOTE
One of the funct ions of the air
conditioner is dehumidi fying the air
and, to use this function, the
temperature does not have to be set to
cold. Therefore, set the temp erature
control dial to the desired position (hot
or cold) and turn on the air conditioner
when you want to dehumidify the cabin
air.
6-10
Interior Comfort
í
Some models.
Climate Control System
Mazda5_8V88-EA-06G_Edition1 Page174
Monday, May 15 2006 9:27 AM
Form No.8V88-EA-06G
To Next Page
