Black plate (285,1)
NOTE
Be sure to install the tire press ure
sensors whenever tires or wheels are
replaced. Refer to Tires and Wheels on
page 5-26.
When repla cing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
Proper tire balancing provides the best
riding comf ort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
Maintenance and Care
Owner Maintenance
8-37
Mazda5_8V88-EA-06G_Edition1 Page285
Monday, May 15 2006 9:28 AM
Form No.8V88-EA-06G
To Next Page
Loading...
