Black plate (296,1)
2. Pull down the blade rubber and slide it
out of the blade holder.
3. Remove the metal stiffeners from the
blade rubber and install them in the
new blades.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
4. Carefully insert the new blade rubber.
Then install the blade assem bly in the
reverse order of removal.
8-32
Maintenance and Care
Owner Maintenance
Mazda6_8W89-EA-06K_Edition1 Page296
Tuesday, November 14 2006 1:25 PM
Form No.8W89-EA-06K
To Next Page
Loading...
