Black plate (197,1)
qSpeedometer
The speedom eter indicates the speed of
the vehicle.
qOdometer, Trip Meter and Trip
Meter Selector
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
Trip meter
Trip meter selector
Odometer
Trip meter B
Press the selector
Press the selector
Trip meter A
Odometer
Odometer
NOTE
When the ignition is switched to ACC or the
ignition is switched off, the odometer or trip
meters cannot be displayed, however, pressing
the selector button can inadvertently switch the
trip meters or reset them during an
approximate ten-minute period in the following
cases:
l
After the ignition is switched to ACC or the
ignition is switched off from ON.
l
After the driver's door is opened.
Odometer
The odometer record s the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip met er A, and the other is recorded in
trip met er B.
Driving Your Mazda
Instrument Cluster and Indicators
5-37
Mazda3_8BM5-EA-10F_Edition2 Page197
Monday, July 26 2010 1:53 PM
Form No.8BM5-EA-10F
To Next Page
Loading...
