5-34
Driving Your Mazda
Switches and Controls
Form No. 8Q50-EA-01G
The ignition switch must be in the ON
position.
▼
▼▼
▼ Windshield Wipers
Turn the wipers on by pulling the lever
down.
INT — Intermittent
1 — Normal
2 — Fast
Variable-speed intermittent wipers
Set the lever to INT and choose the
interval timing by rotating the ring.
Windshield Wipers and
Washer
Frozen Washer Fluid:
Using windshield washer fluid in
freezing temperatures is dangerous.
The washer fluid could freeze on the
windshield and block your vision.
You could have an accident. Don’t use
the washer without first warming the
windshield.
NOTE
Because heavy ice and snow can jam
the wiper blades, the wiper motor is
protected by a circuit breaker. This
mechanism will automatically stop
operation of the blades, but only for
about 5 minutes.
If this happens, turn off the wiper
switch and park off the right-of-way,
and remove the snow and ice.
After 5 minutes, turn on the switch and
the blades should operate normally. If
they don’t resume functioning, consult
an Authorized Mazda Dealer as soon
as possible.
WARNING
OFF
INT
1
2
OFF
INT
J94S.book Page 34 Saturday, June 23, 2001 1:04 PM
To Next Page
Loading...
